{"product_id":"onewaytoolrestbanjobasefor24swing","title":"Oneway Toolrest Banjo Base - Customized","description":"\u003cp\u003eOneway Tool Rest Banjo\u003ca href=\"#one\"\u003e\u003csup\u003e1 \u003c\/sup\u003e\u003c\/a\u003e Bases are some of the best in the world. They use a design patented by Oneway to overcome the problems of traditional cam-lock bases. They clamp quickly and powerfully while maintaining the ability to move and slide easily. The clamp screw handle can even be adjusted to be out of your way when clamped.\u003c\/p\u003e\n\u003cp\u003eOneway's excellent Banjo Bases can be used on lathes from other manufacturers, but we'll need a little information from you to customize the fit. See the notes below.\u003c\/p\u003e\n\u003cp\u003eNot every lathe of the same size is exactly the same. Please check the specifications in the chart below to make sure the banjo will work with your lathe. Oneway banjos are made to use tool rests with 1\" posts that have smooth shafts all the way to the crossbar. Oneway banjos may be slightly taller than your stock banjo; this provides more support, but may be too tall for use with all tool rests on all lathes.\u003c\/p\u003e\n\u003ch5\u003eImportant Notes on Fit\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe listed size of the tool rest base is the swing of the lathe it will fit. e.g. The 12\" tool rest base is designed to fit a lathe with a 12\" swing\u003ca href=\"#two\"\u003e\u003csup\u003e2 \u003c\/sup\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAll Oneway Tool Rest Bases come configured to fit Oneway lathes. eg. The 12\" tool rest base is set up for the Oneway 1224 lathe, the 16\" is set up for the Oneway 1640 lathe, etc.\u003c\/li\u003e\n\u003cli\u003eOneway tool rest bases can be set up for non-Oneway lathes, but it will require a custom Clamp Block and an additional fee.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eYou MUST measure your lathe.\u003c\/span\u003e \u003cbr\u003e\u003cspan style=\"font-style: italic;\"\u003e This information is NOT in your manual and we cannot tell you what size you need. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo order a banjo for a non-Oneway lathe, you will need two measurements: the bed gap and bed thickness of the lathe.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e Bed Gap \u003c\/b\u003e is the space between the ways of the lathe bed. The clamp block needs to fit in the bed gap. (See picture above for clarification.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e Bed Thickness \u003c\/b\u003e Thickness of the lathe bed itself. (See picture above for clarification.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eThere is a custom machining fee for most custom clamp blocks. It is included in the price listed above. Larger or more complicated clamp blocks may require an additional charge.\u003c\/li\u003e\n\u003cli\u003eDelivery time for banjos with custom clamp blocks is 2-6 weeks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-style: italic;\"\u003e The clamp block used for Oneway Easycore System, Spindle Steadys and Bowl Steadys is NOT compatible with the Toolrest Banjo Base. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a banjo for a Oneway lathe, we offer those on \u003ca href=\"\/products\/replacement-toolrest-banjo-base-for-oneway-lathes\"\u003ethis page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ctable class=\"hwpt\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Swing\u003c\/th\u003e\n\u003cth\u003eBanjo Base Length\u003c\/th\u003e\n\u003cth\u003eBanjo Height\u003c\/th\u003e\n\u003cth\u003eTool Rest Post Diameter\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\"\u003c\/td\u003e\n\u003ctd\u003e10-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003ctd\u003e1\" post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e17-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e5-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1\" post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e7-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1\" post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e24\"\u003c\/td\u003e\n\u003ctd\u003e18\"\u003c\/td\u003e\n\u003ctd\u003e8-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\" post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e\n\u003cp\u003e\u003ca name=\"one\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top: -2px; font-size: .9em;\"\u003e\u003cspan style=\"font-size: 1.2em; font-weight: bold;\"\u003e 1 \u003c\/span\u003e What the heck are you talking about \u003cspan style=\"font-weight: bold; font-style: italic;\"\u003e banjo??? \u003c\/span\u003e Long ago the tool rest base on a lathe was a much simpler tool - basically a big flat piece of steel roughly in the shape of a banjo. That name caught on and is still used sometimes now to describe the tool rest base.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"two\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top: -2px; font-size: .9em;\"\u003e\u003cspan style=\"font-size: 1.2em; font-weight: bold;\"\u003e 2 \u003c\/span\u003e What is swing? Swing is the maximum diameter object that can be turned on a lathe - twice the measurement from the center of the spindle to the bed of the lathe.\u003c\/p\u003e\n\u003c!--The patented ONEWAY banjo is designed to solve problems associated with traditional cam-lock tool rest bases.\n This sliding cam clamping mechanism ensures tight clamping and smooth operation over the range of the lathe bed.\n Conventional long cam shafts suffer from cam shaft deflection. This causes non-uniform clamping over the range of\n the toolrest base. Cam shaft deflection also causes the clamp handle to tighten in different positions. A\n conventional clamping mechanism consists of a cam shaft that runs the entire length of the toolrests base.\n Deflection is inavoidable using this unsupported systems. The cams shaft is so long, it bends when clamping\n presssure is applied when positioned in the middle.Oneway solves this problem by replacing the regular long\n cam shaft with a sliding cam assembly. The Toolrest is clamped at the toolrest base with a captured non-marking\n block. As a result a very tight fitting hole can be bored. This improves the toolrest clamp position. The clamp\n screw handle may be adjusted at 45\u0026deg; rotations to assure minimum interference with the handle when turning.--\u003e","brand":"Oneway","offers":[{"title":"12 inch customized for other brand  lathes","offer_id":50821744689434,"sku":"130177","price":294.0,"currency_code":"USD","in_stock":true},{"title":"16 inch customized for other brand lathes","offer_id":50821744722202,"sku":"130179","price":327.0,"currency_code":"USD","in_stock":true},{"title":"20 inch customized for other brand lathes","offer_id":50821744754970,"sku":"130181","price":388.5,"currency_code":"USD","in_stock":true},{"title":"24 inch customized for other brand lathes","offer_id":50821744787738,"sku":"130180","price":388.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/130144-01d.jpg?v=1768340967","url":"https:\/\/www.highlandwoodworking.live\/products\/onewaytoolrestbanjobasefor24swing","provider":"Highland Woodworking","version":"1.0","type":"link"}